hpmc as a binder-manufacture,factory,supplier from China

Hydroxypropyl methyl cellulose (HPMC) is a kind of non-ionic cellulose ether which is made by a series of chemical processing.  They have water solubility, water retention, non-ionic type, PH stability, surface activity, temperature reversible gelatinization, thickening, bonding, film forming, lubricity and mold resistance and other properties.  Therefore, it is widely used in thickening, cementification, suspension, dispersion stability, water retention, improve workability and other occasions.Structural formula OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxypropyl methylcellulose (HPMC), HPMC is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, can be dissolved in cold water but not in hot water, slowly in hot water Swells, peptizes, forms a viscous colloidal solution, cools to a solution, and accordingly becomes a gel when heated.

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS main application1. in the paper industry, it is used as the internal and surface sizing of paper to make the printing ink bright and uniform, the glue film smooth, reduce the ink consumption, and have a certain roughening ability.2. in the textile industry, it is used as warp size to improve the abrasion resistance and weaving efficiency during weaving.

HEMC are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.

Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose ether polymer based on cellulose, a natural polymer derived from refine cotton linter,which are offered as free flowing powder.According to the degree of substitution and modification of substituent, they have different chemical properties and benefits after alkalization and etherification reactions with Sodium hydroxide,Cholromethane,and propylene epoxide.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3HEMC Main applicationHydroxyethyl methyl cellulose (HEMC) is a non-ionic ce

Appearance is White to slightly off-white fibrous or granular powder.

The hydroxypropyl methyl cellulose ether hpmc is supplied with a water-repellent and thickening-presenting cellulose ether.Redispersible polymer powder growing the tile ceramic adhesion .The hpmc can substantially growth the power of the tile adhesive and enhance the stress, and growth the power.Structural formula (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSEM40MNon surface&

MELLUTEL-SL400Application in the Self-levelingSelf-leveling mortar is a special dry mixed mortar product with self-leveling and self-compaction function; it is widely used in factories, hospitals, shopping malls, offices and well. Home furnishing and other places. MELLUTEL leveling  cellulose e ther products, after special process control, widely used in various cement and gypsum based leveling Product system.1. Prevent settlement, stratification, segregation, etc., and ensure the flow degree and operating time of self-leveling mortar2.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

 It comprises cement, sand, limestone, HEMC and various additives, ready to be mixed with water before use.Adhesion Strength after drying of this tile cement should be more than 0.5N/mm2, and the dosage of HEMC is generally about 0.3 to 0.4% in dry mortar to reach this level.HEMC can effectively improve the rheology of plaster and significantly improve sagging phenomenon for latter plastering and reduce the shrinkage and crack formation.Structural formula                          

Structural formulaOR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 (n～2)/2 Modified products           TypeItemHPMCYT1YT100M YT100MN YT1365 YT150MSSpecification of non modified products                      TypeItemHPMCPD/PDSHPMCPK/PKSHEMCEM/EMSNon surfacetreatmentPD100MPD150MPD200MPD300M/EM40MEM60MEM70MEM100MEM150MEM200MSurface treatmentPD100MSPD150MSPD200MSPK8000S PK100MS PK150MS PK200MSEM6000SEM8000SEM10MSEM20MSEM30MSEM60MSEM100MSEM150MSEM200MSGel temperature ℃58.0～64.070.0～

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methylcellulose (hpmc), hpmc is white or milky white, odorless and tasteless, fibrous powder or granules, the loss on drying does not exceed 10%, may be dissolved in cold water but not in warm water, slowly in warm water swells, peptizes, forms a viscous colloidal solution, cools to an answer, and for that reason turns into a gel while heated.

Hydroxyethyl methyl cellulose ether soluble in water and some organic solvents.It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient water-retaining agent.Structural formula (n-2)/2OR=-OH、-[OCH2CH(CH3)]nOHSpeci

Main applicationHPMC is one of the main dispersants in PVC industry. During suspension polymerization of vinyl chloride, it can reduce the interfacial tension between vinyl chloride monomer (VCM) and water, and help VCM to be evenly and stably dispersed in the aqueous medium; Prevent the coalescence of VCM droplets at the initial stage of polymerization; Prevent coalescence between polymer particles in the later stage of the polymerization process. In suspension polymerization system, it plays a dual role of dispersion and stability protection.